Official MICRO Scooter e-Shop | Canada 🍁

eMICRO One Electric Scooter

eMICRO One Electric Scooter

About the eMICRO One Electric Scooter

Imagine the possibilities! The secret of what makes the stealth eMICRO One Electric Scooter so incredible is not immediately obvious as the 500 watt motor is completely hidden inside the back wheel while the Lithium Polymer battery is under the deck of the scooter.  There are no cables or throttles to give anything away!

The powerful “Motion Controlled” motor is engaged through the rider’s kicking action. Each kick engages the motor for 2 – 10 seconds depending on the kick's strength.  With a normal hand throttle and the same size battery, the impressive range, speed and weight of the eMICRO One simply wouldn’t be possible at this time. The rear wheel brake is used to slow down or stop.  With a little practice, the full potential of the eMICRO One is quickly revealed.

The fast charging battery of the eMICRO One is fully charged in just 1 hour. Patented battery management technologies and cell balancing algorithms lead to an excellent battery lifetime of 1000+ charging cycles. Patented pulse technology allows eMICRO One to get more distance out of a lighter battery.

“Slope Support” sensors ensure that motor support automatically increases when riding on an incline so that speed can be maintained without the rider having to increase kicking intensity.  Yup. Genius.

The environmentally friendly eMICRO One Electric Scooter is a clever beast with an unbeatable fun factor.  Its potential speed, range, weight and short recharging time give the modern urbanite almost limitless independent mobility possibilities.

Please note:  Due to the high speeds that can be achieved with the eMICRO One, it should only be ridden on smooth, dry, hard surfaces.  The wearing of a helmet is strongly advised.


Technical Specifications

Model Name eMICRO One Electric Scooter
Recommended Age Range  16 + years of age
Weight Limit of Rider 100 kg
Weight of Scooter 7500 g
Scooter Material Aluminum
Wheel Size and Material Front:150 mm Dual Core Back: 110 mm x 65 mm Motor 
Wheel Bearings Precision Bearings
Handlebar Height from Ground Adjustable: 773 mm to 1007 mm
Handlebar Height from Kickboard Deck Adjustable: 700 mm to 934 mm
Handlebar Width  485 mm
Scooter Deck Length x Width  372 mm x 140 mm
Scooter Deck Thickness (Battery) 33 mm
Scooter Folded Length x Width x Height  780 mm x  485 mm x 245 mm
Scooter Ground Clearance  40 mm


Battery

Energy content/capacity: 2.2 Ah/82 Wh. Cell type: Lithium polymer cells. Number of cells: 10. Note: The battery of the eMICRO One is smaller than 100Wh (82Wh) allowing the scooter to be transported on most airplanes. Please consult your airline’s policy on transporting batteries.  Important: To prolong the life of the rechargeable battery, the eMICRO One scooter must be charged at least once every 3 months.

  • Front Wheel:  The 150 mm dual core front wheel.
  • Rear Wheel: 110 mm in diameter and 65 mm wide.

Motor

The brush less BLDC motor is custom-filled inside the hub of the rear wheel. Due to its small size and resultant high rotation speed, the motor can produce enormous power of up to 500 watts and register torque of 4 newton metres.

Speed Settings

With the setting tool a rider can wirelessly switch between 3 individual pre-programmed speed settings. Choose from Eco, Standard and Sport modes depending on your riding style. The programs limit the maximum speed of the motor support and the maximum power of the motor. The setting tool communicates with the on-board computer through magnet induction technology.

Communication Display

Four discrete LEDs built into the deck show the speed setting the rider has chosen and how much charge is left.

Regenerative Braking

In addition to physical braking by friction the eMICRO One also uses regenerative braking. This not only charges the battery but also results in much shorter braking distances.

Assistance Switch

Besides cutting the motor when braking, the brake can be used to switch the electric motor off completely. Tap the brake lever three times in succession and the motion control sensor is deactivated. To reactivate the motion control sensor, tap the brake lever three times again.

Slope Support

Slope support is a technological feature of the motion control algorithm that ensues high power and torque when riding uphill. The sensors detect a slope and increase power and torque to compensate.

Auto On/Off

Integrated sensors detect the movement of the eMICRO One and it turns on. After some seconds of inactivity, the eMICRO One falls automatically in to sleep mode to save energy.

Key Features

  • Folding Mechanism:  2 Button
  • Frame Material: Aircraft grade aluminum
  • Deck: Textured rubberized surface for extra grip.
  • Kickstand: Makes parking easy.

Service

Please contact Kickboard Canada Inc. for service.